Small size: 2 Diameters of 4.5 and 5.5 mm with 1 Height of 3.5 mm

Large size: 2 Diameters of 5.5 and 6.5 mm with the same Height of 3.5 mm

* Zir Abutment

This is a customized abutment, made of Zirconica, each abutment includes an Abutment Screw Design.

For the Small size fixtures, we can use 2 Diameters of 4.5 and 5.5 mm, both with a Height of 10 mm.

For the Large size fixtures, 1 Zir Abutment is available with a Dia of 5.5 mm and a Height of 10 mm

* TiDesign^TM

Customized abutment made of Titanium.

For the Small sizes fixtures (3.5 and 4.0 mm) we have 8 different TiDesign abutments, 2 of which are 20^o angled.

For the Large size fixtures (4.5 and 5.0 mm) we have 5 different TiDesign abutments, of which 1 is angled.

It includes an Abutment Screw Design.

* Profile BiAbutment

5 different items made of Titanium are available for both Small and Large size fixtures. The Height is the same 10 mm and the Dia varies between 4.5, 5.5 and 7 mm. It includes an Abutment Screw Design.

* 20^o UniAbutment

Made of Titanium, this UniAbutment is available for the 2 sizes of fixtures.

Small size: 1 Diameter 3.5 mm with Heights of 0.5, 1,2, 4, 6 and 8 mm.

Large size: 1 Diameter of 3.5 mm and Height varying from 0.5 to 8 mm.

* 45^o UniAbutment

Made of Titanium and available in the same modalities as the 20^o Uniabutment.

* 20^o Proheal Cap

* 45^o Proheal Cap

Note: Both 20^o and 45^o Uniabutment are used in the screw retained partial restorations.

* Angled Abutment

Made of Titanium material. For the Small size fixtures we have 1 Diameter (4 mm) in 2 different Heights (0.8 and 2 mm) For the large size fixtures, we have also one 4 mm Diameter with 0,5 and 2 mm Height.

* Healing Cap Angled

* Bridge Screw

Made of Ti-alloy, available in Hex and Slot.

* 20^o UniAbutment

Made of Titanium, this UniAbutment is available for the 2 sizes of fixtures.

Small size: 1 Diameter 3.5 mm with Heights of 0.5, 1,2, 4, 6 and 8 mm.

Large size: 1 Diameter of 3.5 mm and Height varying from 0.5 to 8 mm.

* 45^o UniAbutment

Made of Titanium and available in the same modalities as the 20^o Uniabutment.

* 20^o Proheal Cap

* 45^o Proheal Cap

Note: Both 20^o and 45^o Uniabutment are used in the screw retained partial restorations.

* Angled Abutment

Made of Titanium material. For the Small size fixtures we have 1 Diameter (4 mm) in 2 different Heights (0.8 and 2 mm) For the large size fixtures, we have also one 4 mm Diameter with 0,5 and 2 mm Height.

* Healing Cap Angled

* Bridge Screw

Made of Ti-alloy, available in Hex and Slot.

Made of Stainless Steel, 1 item is available for the Small size fixtures and 1 item is available for the Large sized fixtures.

* Implant Guide Pin

Used when working with abutments tightened with Abutment Screw Design.

* Direct Abutment Replica

Available in 3 diameters: 4, 5 and 6 mm

* Direct Abutment Burnout Cylinder

Same 3 diameters are available.

* Direct Abutment Impression Pick-up

Also available in the 3 diameters above (4, 5 and 6 mm)

* Direct Abutment Healing Cap

* Direct Abutment Carrier

* 20^o UniAbutment Pick-up

* 45^o UniAbutment Pick-up

* 20^o/45^o UniAbutment Transfer

* Angled Abutment Pick-up

* Abutment Replica

Available for the 20^o, 45^o UniAbutments and for the Angled Abutment.

* Abutment Guide Pin

* Temporary Cylinder

Available for the 20_o, 45^o UniAbutments and for the Angled Abutment.

* Semi-Burnout Cylinder

Made of gold platinum alloy and plastic, also available for the 20_o, 45^o UniAbutments and for the Angled Abutment.

* Burnout Cylinder

Made of plastic and available for the 20_o, 45^o UniAbutments and for the Angled Abutment.

* Titanium Cylinder

Made of Titanium and plastic also available for the 20_o, 45^o UniAbutments and for the Angled Abutment.

* OD Cylinder

Made of Gold Alloy, used on UniAbutment for bar restorations.

* Locator Abutment Pick-up

* Locator Abutment Replica

* Locator Process Kit

* Locator Inserts

* Ball Abutment Pick-up

* Ball Abutment Replica

For more details visit: www.astratech.com